The Hi-Speed USB host controller and peripheral controller comply to Universal Serial Bus Specification Rev. 2.0 and support data transfer speeds of up to 480 Mbit/s. The Enhanced Host Controller ...

To communicate with a device connected via universal serial bus (USB), a computer needs the driver, not just for the device itself, but also for the USB controller. Microsoft Windows uses USB ...

The PCA9564 is an integrated circuit designed in CMOS technology that serves as an interface between most standard parallel-bus microcontrollers/microprocessors and ...

Controller Area Network (CAN) data bus is a serial communications protocol that supports distributed real-time control with a high level of security. Introduced in the 1980s by Robert Bosch GmbH, the ...

New bus controllers for both CAN and Powerlink round out the vendor’s existing product range. The CAN bus controller meets the CANopen specifications DS 301 and DS 401. Automatic baud rate detection, ...

The X20 bus controller based on Ethernet Powerlink is billed as the most compact Ethernet bus controller available, with a system width of just 37.5mm. Made up of a base module, a supply module to ...

The long awaited PCIe 3.0 bus has finally arrived and it is more than a bit fashionably late for the enterprise arena. The rush is on for companies such as LSI to deliver a host of storage components ...

The couplers connect some 180 different I/O terminals with Ethernet TCP/IP. The controller adds an IEC 61131-3 programmable PLC and can be used as a low-cost controller. Both devices feature an RJ 45 ...

A technical paper titled “A Systematic Method to Generate Effective STLs for the In-Field Test of CAN Bus Controllers” was published by Delft University of Technology, Cadence, and Politecnico di ...

The Flexi Loop safety controller node can cascade up to 32 safety switches and OSSD safety sensors onto one loop — independent of the manufacturer. The Loop uses a single cable with an M12 plug to ...

According to some users, the Device Manager shows an exclamation mark in front of the SMBus Controller, this means that the SMBus controller is not recognized. In this article, we are going to see ...